AIR Suspension designed with the driver in mind.
ARTAIR struts were developed for clients who want absolute control over their air suspension system; they require ultimate lows and practicality with ease of use.
The air suspension system achieves all these objectives by using an air spring. An air spring allows the air suspension to rise as it fills with air and lowers as the air is released. We have three different adjustability configurations for the air kits.
-
Air Spring Height—Using the air spring, the client can raise and lower his vehicle's height at any given moment.
-
Shock Length—We use an adjustable foot to allow shock length to be changed, therefore offsetting the air spring's working range.
-
Damping—A damping adjuster allows us to fine-tune a vehicle's ride to be more responsive or compliant.
-
Requires little to no modification for fitment.
good to know
Components + hardware
ADJUSTABLE FOOT
Made to OEM specifications, therefore, allowing one the seamlessly mount to OEM components while maintaining placement of brake lines and sensor mounts.
Designing the kit to OEM specification allows all our packages to be bolt-on kits with little to no modification required for fitment.
THREADED BODIES
The entire body is precision machined from a hollow bar of steel then coated protect from corrosion.
Our threaded body design allows the length of the shock absorber to adjust by offsetting the bottom foot.
Top mount
Designed to reduce compliance in your suspension to give that direct feel without the negative effect of increasing NVH (noise, vibration and harshness).
These transform your driving experience without the cost of daily comfort.
LOCKING COLLAR
These parts are anodised to protect them from oxidation. Allowing these parts to be durable and lightweight.
DAMPING ADJUSTER
The one-way damping adjuster controls the amount of bleed allowed through the bleed bypass in the piston rod. The bypass creates a bleed for the oil from the shim stack; this allows the adjuster to increase or decrease damping force.
The control of the amount of oil flowing through the bypass provides for a broad range of the ride set up from sporty to comfort.
SEE THE ACTION, VISIT OUR GALLERY
VITAL hardware
Piston rods
Piston rods are made from heat-treated alloy steel to ensure strength, machined to exact tolerances the plated with a hard, durable chromium plating that protects from corrosion and provides a smooth surface for the oil seal.
DROP LINKS
High-quality Adjustable drop links ensuring anti-roll bar is in a perfect position with lowered suspension. They are maintaining optimum angles and clearances between the suspension components. OEM quality end links provide durability and a maintenance-free life cycle.
nok seals
German designed and manufactured high-quality seals. Seals are a critical component as they are a significant factor in durability and stiction characteristics.
Monotube
Our monotube shock absorber has a large diameter piston creating increased damping forces. The design also separates the oil from the nitrogen with an aluminium floating piston reducing damping force fade under performance driving. The monotube shock absorber built for our clients who enjoy spirited driving without compromise to daily driving comfort.
AIR Springs
Made of quality rubber and polyester portions our air springs are made to last. Rigoursously tested and proven to go the xtra mile.
